Mobil DTE™ 20 Series oils are high performance anti-wear hydraulic oils.
They meet the stringent requirements of hydraulic systems using high pressure, high output pumps as well as other hydraulic system components such as close clearance servo-valves and numerically controlled (NC) machine tools.
These products met the most rigorous performance requirements of a wide range of hydraulic system and component manufacturers, allowing use of a single product with excellent performance characteristics.
Datasheets
Features and Benefits
• Excellent oxidation stability helps reduce maintenance downtime and costs by contributing to system cleanliness and deposit reduction, enable long oil and filter life
• Enhanced anti-wear and corrosion protection of system components using various metallurgy help extend component life and improve production capacity
• Controlled demulsibility protects systems from small and large quantities of water
• Keep clean properties reduce system deposits and sludge help protect equipment and extend equipment life, reduce maintenance costs and improve total system performance
• Quality reserve maintains performance features even under severe service conditions and extended drain intervals
Applications
• Hydraulic systems critical to deposit build-up or where sludge and deposits form with conventional products
• Hydraulic systems requiring a high load-carrying capability and anti-wear protection, and when thin oil-film corrosion protection is an asset
• Where small amounts of water are unavoidable
• Systems containing gears and bearings
• Machines employing a wide range of components using various metallurgy
Specifications and Approvals
|
This product has the following approvals: |
MOBIL DTE 22 |
MOBIL DTE 24 |
MOBIL DTE 25 |
MOBIL DTE 26 |
|
Denison HF-0 |
|
X |
X |
X |
|
Husky HS 207 |
|
|
X |
|
|
This product is recommended for use in applications requiring: |
|
|
|
|
|
Eaton I-286-S |
|
X |
X |
X |
|
Eaton M-2950-S |
|
X |
X |
X |
|
Fives Cincinnati P-68 |
|
X |
|
|
|
Fives Cincinnati P-69 |
|
|
|
X |
|
Fives Cincinnati P-70 |
|
|
X |
|
|
This product meets or exceeds the requirements of: |
|
|
|
|
|
DIN 51524-2:2006-09 |
X |
X |
X |
X |
Properties and Specifications
|
Property |
MOBIL DTE 21 |
MOBIL DTE 22 |
MOBIL DTE 24 |
MOBIL DTE 25 |
MOBIL DTE 26 |
MOBIL DTE 27 |
MOBIL DTE 28 |
|
Grade |
ISO VG 10 |
ISO VG 22 |
ISO VG 32 |
ISO VG 46 |
ISO VG 68 |
ISO VG 100 |
ISO VG 150 |
|
Copper Strip Corrosion, 3 h, 100 C, Rating, ASTM D130 |
1B |
1B |
1B |
1B |
1B |
1B |
1B |
|
FZG Scuffing, Fail Load Stage, A/8.3/90, ISO 14635-1 |
|
|
12 |
12 |
12 |
12 |
12 |
|
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
174 |
200 |
220 |
232 |
236 |
248 |
276 |
|
Foam, Sequence I, Stability, ml, ASTM D892 |
0 |
0 |
0 |
0 |
0 |
0 |
0 |
|
Foam, Sequence I, Tendency, ml, ASTM D892 |
20 |
20 |
20 |
20 |
20 |
20 |
20 |
|
Foam, Sequence II, Stability, ml, ASTM D892 |
0 |
0 |
0 |
0 |
0 |
0 |
0 |
|
Foam, Sequence II, Tendency, ml, ASTM D892 |
20 |
20 |
20 |
20 |
20 |
20 |
20 |
|
Foam, Sequence III, Stability, ml, ASTM D892 |
0 |
0 |
0 |
0 |
0 |
0 |
0 |
|
Foam, Sequence III, Tendency, ml, ASTM D892 |
20 |
20 |
20 |
20 |
20 |
20 |
20 |
|
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
2.7 |
4.5 |
5.3 |
6.7 |
8.5 |
10.9 |
14.3 |
|
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
10 |
21 |
31.5 |
44.2 |
71.2 |
95.3 |
142.8 |
|
Pour Point, °C, ASTM D97 |
-30 |
-30 |
-27 |
-27 |
-21 |
-21 |
-15 |
|
Rust Characteristics, Procedure B, ASTM D665 |
PASS |
PASS |
PASS |
PASS |
PASS |
PASS |
PASS |
|
Viscosity Index, ASTM D2270 |
98 |
98 |
98 |
98 |
98 |
98 |
98 |